| PA6 TR12 广州市洋达工程塑料原料厂 物性数据 |
| 规格级别： | --- | 外观颜色： | 透明 |
| 用途概述： | 工业用监视窗、计算机、光学仪器、静电复印机显影剂贮器、X射线仪窥窗、滑雪运动器材、机器、汽车等储油罐、可制薄膜。 | ||
| 备注说明： | --- | ||
| 性能项目 | 试验条件[状态] | 测试方法 | 测试数据 | 数据单位 | |
| 物理性能 | 相对密度 | --- | --- | 1.12 | g/cm3 |
| 透光率 | --- | --- | 85-90 | % | |
| 折射率 | --- | --- | 1.566 | --- | |
| 弯曲强度 | --- | --- | 125 | MPa | |
| 模塑收缩率 | --- | --- | 0.5 | % | |
| 机械性能 | 弯曲弹性模量 | --- | --- | 2.9 | GPa |
| 冲击强度 | 无缺口,20℃ | --- | 不断 | KJ/m2 | |
| 冲击强度 | 无缺口,-50℃ | --- | >60 | KJ/m2 | |
| 拉伸强度 | --- | --- | 60 | MPa | |
| 冲击强度 | 缺口,20℃ | --- | 10-15 | KJ/m2 | |
| 冲击强度 | 缺口,-50℃ | --- | 3 | KJ/m2 | |
| 球压痕硬度 | --- | --- | 60S140 | MPa | |
| 耐磨性 | --- | --- | 25/1000 | mm/r | |
| 电气性能 | 表面电阻率 | 干燥 | --- | 5×1013 | --- |
| 表面电阻率 | 浸水24h | --- | 5×1013 | --- | |
| 体积电阻率 | 干燥 | --- | 5×1014 | --- | |
| 体积电阻率 | 80%RH,4d | --- | 5×1014 | --- | |
| 介电常数 | 100%RH,7d,1KHz | --- | 3.9 | --- | |
| 介电常数 | 100%RH,7d,1MHz | --- | 3.4 | --- | |
| 介电损耗正切 | 100%RH,7d,1KHz | --- | 3×10-2 | --- | |
| 介质损耗角正切 | 100%RH,7d,1MHz | --- | 3×10-2 | --- | |
| 介电强度 | 1mm | --- | 25 | KV/mm | |
| 热 性 能 | 热变形温度 | 1.85MPa | --- | 130 | ℃ |
| 线性膨胀系数 | --- | --- | 6×10-5 | K-1 | |
| 热导率 | --- | --- | 0.209 | W/m.k | |
| 比热容 | --- | --- | 1.47 | Kj/Kg.K | |
| 马丁耐热 | --- | --- | 100 | ℃ | |
| 长期使用温度 | --- | --- | 90 | ℃ | |
| 维卡软化点 | --- | --- | 145 | ℃ | |
| 热变形温度 | 0.46MPa | --- | 140 | ℃ | |