# thermally conductive material, what is thermal conductive plastic, thermally conductive filler, base resin PPS PA66 PEEK, aluminum oxide vs magnesium oxide, inorganic thermally conductive particles | RenJie Plastics

> Source: https://www.rjplastics.com/en/article/what-is-a-thermally-conductive-material-definition-types

## Knowledge of Thermally Conductive Plastics

[Home](/en/)›[Support](/en/support/thermally-knowledge)›[Knowledge of Thermally Conductive Plastics](/en/support/thermally-knowledge)›**What Is a Thermally Conductive Material? Definition & Types**

      Support

      - Knowledge of Thermally Conductive Plastics
- Knowledge of Conductive Plastics
- Knowledge of Modified Plastics

      Need help choosing?

        [Get a quote](/en/contact)

## What Is a Thermally Conductive Material? Definition & Types

    **

### 1. Definition and the Metric That Matters

A thermally conductive material is a plastic composite made by adding thermally conductive metal oxides, graphite fibers or carbon fibers to ordinary plastics in order to improve their thermal conductivity.

Thermal performance is mainly measured by **thermal conductivity** (unit: **W/(m·K)**). The higher the thermal conductivity, the better the material conducts heat.

### 2. The Two Categories of Thermally Conductive Plastics

Thermally conductive plastics fall into two broad categories:

- Electrically conductive thermally conductive plastics
- Electrically insulating thermally conductive plastics

Which one you need depends on the electrical environment of the product: applications that must remain insulating (LED luminaire housings, electronic packaging parts) require electrically insulating thermally conductive plastics.

### 3. Main Composition: Base Material and Fillers

Thermally conductive plastics consist mainly of a **base material** and **fillers**.

**Base materials**

PPS, PA6/PA66, LCP, TPE, PC, PP, PPA, PEEK, and others.

**Fillers**

AlN (aluminum nitride), SiC (silicon carbide), Al2O3 (aluminum oxide), graphite, fibrous high-thermal-conductivity carbon powder, flake-shaped high-thermal-conductivity carbon powder, and others.

### 4. The Three Filler Types and How to Choose

There are three main types of thermally conductive filler: **carbon materials, inorganic thermally conductive particles, and metal particles**.

**Selection logic:** given the **cost** and **insulation** requirements of these plastics, **inorganic thermally conductive particles** are almost always chosen. Among them, aluminum oxide, magnesium oxide and zinc oxide are the most widely used because they are relatively inexpensive and make it easy to adjust the cost and whiteness of the finished plastic. Other high-thermal-conductivity fillers are of course used to meet higher thermal requirements, at a cost that steps up accordingly.

### 5. Al2O3 vs. MgO vs. ZnO: Common Inorganic Particles Compared

| Filler | Thermal conductivity | Loading behaviour | Overall assessment |
| --- | --- | --- | --- |
| Magnesium oxide (MgO) | Relatively high | Thickens easily — whether the loading can be raised is a problem | Good conductivity, limited loading |
| Aluminum oxide (Al2O3, flake) | Moderate | After modification, high loadings are easy to reach | The most balanced option; high loading after modification |
| Zinc oxide (ZnO) | The lowest | Relatively hard to fill in large amounts | Limited in both conductivity and loading |

**Conclusion:** for balanced high loading, cost and insulation, modified flake aluminum oxide is the first choice; where conductivity comes first and a loading limit is acceptable, magnesium oxide is an option; zinc oxide, limited in both conductivity and loading, is mostly used where thermal requirements are not demanding.

### 6. FAQ

**Q1: What is a thermally conductive material?** A: A plastic composite made by adding thermally conductive metal oxides, graphite fibers or carbon fibers to ordinary plastics to improve their thermal conductivity.

**Q2: How is thermal performance measured?** A: Mainly by thermal conductivity, in W/(m·K).

**Q3: What are the two categories of thermally conductive plastics?** A: Electrically conductive and electrically insulating thermally conductive plastics.

**Q4: What are the main components?** A: A base material and fillers. Base materials include PPS, PA6/PA66, LCP, TPE, PC, PP, PPA and PEEK; fillers include AlN, SiC, Al2O3, graphite, fibrous high-thermal-conductivity carbon powder and flake-shaped high-thermal-conductivity carbon powder.

**Q5: What are the three main filler types?** A: Carbon materials, inorganic thermally conductive particles and metal particles. Given cost and insulation requirements, inorganic thermally conductive particles are generally chosen.

**Q6: How do Al2O3, MgO and ZnO differ?** A: Magnesium oxide has relatively high thermal conductivity but thickens easily, limiting loading; flake aluminum oxide offers moderate conductivity and, after modification, high loadings; zinc oxide has the lowest conductivity and is hard to fill in large amounts.

Shenzhen RenJie Plastic Materials Co., Ltd. is a well-known specialized manufacturer of thermally conductive plastics in China and holds a leading domestic position in the development and production of thermally conductive materials. Sales hotline: 18681139818; Contact: Tang Jihua.

### Question not answered here?

Send us the grade and application, our engineers will advise.

  *Your name***Company Email***Phone / WhatsApp Country Product of interest Quantity Target price Application  Message Send inquiry*
  We only use your details to reply to this inquiry. We never share them.

### Need a quotation or product data?

      Send us your specification and we will come back with a solution within 24 hours.

    [Get a quote](/en/contact)
      [tjh@rjplastics.com](mailto:tjh@rjplastics.com)