# Thermal conductive plastic, PA thermal conductive plastic, nylon thermal conductive plastic, thermal conductivity | RenJie Plastics

> Source: https://www.rjplastics.com/en/product/tcp200-18-02a

## Nylon Thermal Plastic

[Home](/en/)›[Products](/en/products)›[Thermal conductive plastics](/en/products/thermal)›[Nylon Thermal Plastic](/en/products/qgtr)›**1.8W RenJie®TCP200-18-02A Thermally Conductive Plastic**

      **## 1.8W RenJie®TCP200-18-02A Thermally Conductive Plastic Model: TCP200-18-02A**

    RenJie ® TCP200-18-02A is a black nylon thermally conductive plastic with a thermal conductivity of 1.5W/m · K, a thermally conductive engineering plastic developed specifically for the housing design that requires high thermal conductivity and reduces weight by more than 30% compared to similar aluminum equipment.

| Product Description | Nylon Thermal Plastic |
| --- | --- |
| RenJie®Grade | TCP200-18-02A |
| Dielectric Breakdown Voltage | >5.5(KV/mm) |
| Dielectric Constant, 1MHz | 4.5MHz |
| Flame Retardant Rating | V-0 |
| Specific Gravity (g/cm³) | 1.45 |

    [Get a quote**](#inquiry)
      Add to inquiry list

    tjh@rjplastics.com+86 13712390573

    Overview
    Specifications

  RenJie ®TCP200-18-02Ais a black nylon thermally conductive plastic with a thermal conductivity of 1.8W/m · K, a thermally conductive engineering plastic developed specifically for the housing design that requires high thermal conductivity and reduces weight by more than 30% compared to similar aluminum equipment.

### RenJie®TCP200-18-02A Thermally Conductive Plastic Features

- Even heat dissipation, preventing hotspots and reducing local deformation of parts due …
- Lightweight, lighter than aluminum
- Easy to mold and process, no secondary processing required
- High flexibility in product design

### RenJie®TCP200-18-02A Thermally Conductive Plastic Application

Typical application targets for this grade include Heat dissipation housing for LED bulbs and spotlights, light engine substrates, Insulation brackets and housings for battery management systems, Housings for charging equipment, Insulation brackets and sensor housings for motor drivers, electrical junction boxes.

| Parameter | Value (typical / as stated) | Method / note |
| --- | --- | --- |
| Typical Properties (Part A) |
| Color | Black | Visual |
| Construction | Nylon | - |
| Melt Index | 150 g/10min | ASTM D1238 |
| Density (g/cm³) | 1.45 | ASTM D792 |
| Shrinkage | 0.3~0.5 % | ASTM D955 |
| Tensile Strength | 55 MPa | ASTM D638 |
| Flexural Strength | 70 MPa | ASTM D790 |
| Flexural Modulus | 9000 MPa | ASTM D790 |
| Notched Izod Impact | 4.5 KJ/m² | ASTM D256 |
| Dielectric Breakdown Voltage (V/mm) | ≥5500 | ASTM D149 |
| Dielectric Constant @1MHz | 2.5 | ASTM D150 |
| Volume Resistivity (Ω·cm) | 8.0×10¹² | ASTM D257 |
| Heat Deflection Temperature | 180 °C | ASTM D648 |
| Vicat Temperature | 170 °C | ASTM D648 |
| Thermal Conductivity (Through-plane) | 1.8 W/m·K | ASTM D5470 |
| Flame Retardant Rating | V-0 | UL94 (E331100) |
| Recommended Injection Parameters (Part A) |
| Material Barrel Temperature — One Section | 230-250 °C | — |
| Material Barrel Temperature — Second Section | 245-260 °C | — |
| Material Barrel Temperature — Three Section | 245-260 °C | — |
| Nozzle Temperature | 240-260 °C | — |
| Melt Temperature | 245-260 °C | — |
| Drying Material Temperature (4h) | 90-120 °C | — |
| Mold Temperature | 80-100 °C | — |
| Injection Molding Pressure | According to Machine Tonnage Bar | — |
| Injection Molding Speed | Medium Speed mm/s | — |

* Match values to the PDF revision cited on your purchase order.

| Product Description | Nylon Thermal Plastic |
| --- | --- |
| RenJie®Grade | TCP200-18-02A |
| Dielectric Breakdown Voltage | >5.5(KV/mm) |
| Dielectric Constant, 1MHz | 4.5MHz |
| Flame Retardant Rating | V-0 |
| Specific Gravity (g/cm³) | 1.45 |
| Thermal Conductivity Through Plane (W/m·K) | 1.8W/m-K |
| Volume Resistivity (Ω·m) | 8.0×10¹² |
| Base Polymer | Nylon(PA) |
| Color | Black |
| Melt index | 150 g/10min |
| Shrinkage | 0.3~0.5 % |
| Tensile strength | 55 MPa |
| Flexural strength | 70 MPa |
| Flexural modulus | 9000 MPa |
| Impact Strength, notched | 4.5 kJ/m² |

### Related products

  [View all**](/en/products)

  [*709AN/747AN/920AN #### Antistatic ABS Compound RENJIE® antistatic ABS compound with 10^8–10^10 Ω surface resistance. 709A… View details*](/en/product/antistatic-abs-compound)[*757CF20/757CF30/757CF15 #### 15% Carbon fiber ABS RENJIE carbon fiber reinforced ABS is a high-performance thermoplastic com… View details*](/en/product/15-carbon-fiber-abs)[*70CF30/70CF20/70CF15 #### 30% Carbon Fiber Nylon 66 Explore Carbon Fiber Conductive Nylon properties, CFRTP Conductive Nylon g… View details*](/en/product/30-carbon-fiber-nylon-66)

### Request a quotation or sample

We reply with price, MOQ and lead time within one business day.

  *Your name***Company Email***Phone / WhatsApp Country Product of interest Quantity Target price Application  Message Send inquiry*
  We only use your details to reply to this inquiry. We never share them.

### Need a quotation or product data?

      Send us your specification and we will come back with a solution within 24 hours.

    [Get a quote](/en/contact)
      [tjh@rjplastics.com](mailto:tjh@rjplastics.com)